Materials: HT150, HT200, QT400(GJS400), Machining precision: 10-50μm | |
Core Shaft Max diameter: 600mm; Length: 1100mm; Tolerance:0.005-0.03mm | |
Cover Flange Max Diameter: 1000mm, Thickness: 350mm, Tolerance: 0.01-0.03mm； Materials：Q235-A、16Mn、45钢、20 etc. | |
Max Diameter: 450mm, Length: 5500mm, Machining Precision:3-5μm; Also can milling key slot and deep hole. |
| 
直径最大350mm，长度200mm，精度达到10-50μm；椭圆度在30μm以内。 |
| Textile machine parts |
| Core Shaft |
| Cover Flange |
| Shaft part 1 |
| Small thinkness bush |
Diameter：10-500mm， Length：50-1000mm, Materials： bronze and brass | |
Max Diameter: 450mm, Length: 5500mm, Machining Precision:3-5μm; Also can milling key slot and deep hole. | |
Length: 1100mm, Width: 600mm, High: 320mm; Material: 45 #, 42CrMo 9Cr14V, etc. | |
Materials: Q235-A, 16Mn, S275JR, S355JR, |
| 
有特殊形状外形的板类机械加工零件。 |
| Copper sleeve，brass nut |
| Flange |
| Bearing Support |
| Machining and Welding Parts |
| Bats Parts |
According to drawing and the special requirements of customers parts. | |
Trapezoidal thread screw | |
Casting： HT150, HT200, QT400(GJS-400) | |
Cylinder bearing for special Cylinder. |
| 
材料：Q235-A、16Mn、SUS304、42CrMo；表面光洁度：0.8以上；平面度：0.1mm以内。 |
|
| Screw mandrel |
| Flange Busher |
| Cylinder bearing |
| Thickness under 10mm plate parts |
Length: 1100mm, Width: 600mm, High: 320mm; Material: 45 #, 42CrMo 9Cr14V, etc. | |
Textile Machine Parts，Materials: C40, C45, Q345, 42CrMo, Surface treatment: Galvanization | |
Single flange, Materials: Q235-A 20# 45# 16Mn | |
|
| 
管路中间转向连接块，气动液压等回路用。 |
| Guide pad |
| Textile parts |
| Flange |
| Driving wheel |
| Link block |
|
